HPE Ethernet 10Gb 2P 560SFP+ Adptr

1.861,34 lei

Stoc epuizat

SKU: 665249-B21 Categorie:

Descriere

Lifecycle

  • Obsolete Date 31-01-2023
  • End of support date 31-01-2028

Specifications

  • Power Typical – 10.0W Max – 10.8W
  • Network processor Intel® 82599 Controller
  • Protocol supported 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.1au, 802.3ap, 802.1as, 802.3ak,802.1qaz, 802.1Qbb
  • Network controller Intel 82599 Ethernet Controller
  • Port speed 10 GbE
  • Weight 0.45 kg
  • Product dimensions (H x W x D) 2.25 x 9.5 x 7.5 in
  • Minimum dimensions ( H x W x D) 5.72 x 24.13 x 19.05 cm
  • Transfer rate 10 Gb/sec Per Port
  • Data rate 10Gb per port, 20Gb Total
  • Form factor Stand Up
  • Supported Cables Active Optical Cable (AOC) Direct Attach Copper (DAC)
  • Bus type PCIe Gen2 x8
  • IEEE compliance 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.1au, 802.3ap,802.1as, 802.3ak,802.1qaz, 802.1Qbb
  • Compatible operating systems Microsoft Windows Server 2008, Server 2008R2, and HPC Server 2008, 32 and 64-bit Microsoft Windows Server Hyper-V Microsoft Windows Small Business Server 2011 Red Hat Enterprise Linux 5.7 and 6.1 SLES 10 and 11 VMware 4.1u2 and 5.0u1 Solaris 10
  • Connector type SFP+
  • Server type supported ProLiant servers
  • Power availability 10W (maximum)
  • Warranty Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year, limited warranty). Minimum: One year limited warranty.
  • Technology Network processor
  • Weight 1 lb

Quickspecs

Overview

Do you need a dual-port 10GbE low-cost, low-power adapter designed for your HPE ProLiant Gen8 and select G7 ML/DL/SL server? The HPE Ethernet 10Gb 2-port 560SFP+ Adapter features both low-cost and low-power in a dual port PCIe v2.0 x8 form factor. The HPE 560SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization and scalability that complement the HPE Gen8 server platform. The HPE 560SFP+ comes with both low profile and standard brackets and has two SFP+ cages that enable connections with DACs as well as SR fiber optic modules. It is SR-IOV ready and supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, and PXE boot.

Features

Addresses the Demanding Needs of the Next Generation Data Center

The HPE Ethernet 10Gb 2-port 560SFP+ Adapter is an easy to install and configure PCIe v2.0 x8 adapter that fits in a standard PCIe slot and comes with low profile and standard brackets. Two SFP+ cages enable connections with DACs and SR fiber optic modules.

Delivers 20 Gb/s full duplex Ethernet transfer rate per port (40 Gb/s aggregate).

New I/O technologies increase performance, reduce system power and I/O latency, and support Precision Time Stamping protocol (IEEE 1588 and 802.1AS).

Optimized for virtualization (VLAN tagging, NetQueue, VMQ, VMDq).

Supports Wake-on-LAN (WOL) at 1 Gb, PXE, MSI-X, NIC teaming, IPv6, and HPE Sea of Sensors 3D Technology.

Compatible products

Documents

Informații suplimentare

Producator

HPE

Garantie

12

Recenzii

Nu există recenzii până acum.

Fii primul care adaugi o recenzie la „HPE Ethernet 10Gb 2P 560SFP+ Adptr”

Adresa ta de email nu va fi publicată. Câmpurile obligatorii sunt marcate cu *